Quick Home Maintenance Tips

If you have been looking for some home improvement tips that won’t take more than a few minutes from your precious time, you are on the right page. This article is for you, especially if you are a busy homeowner. Read on.

Fixing a chair

Are you trying to fix an old chair? If so, we suggest drilling pilot holes and driving screws via the rungs bottom and into the chair legs.

Vinyl Door or Window

If your vinyl doors or windows don’t open properly, the channels may have accumulated gunk. At times, even clean doors and windows may bind. You may spray dry spray lubricant on the target areas and then use a rag to wipe it off. Using oil lubricants is not a good idea as they can catch dirt damaging the vinyl.

Repairing a Shutoff Valve

If the shutoff value is faulty, you can get it replaced. But if you can’t, you should go to the nearby hardware store to buy a good replacement washer. Remove the grit from the valve and fit the new washer. This will fix the problem.

Loose Showerhead

If you want to fix a problematic showerhead or a wobbly pipe, you can use some expanding foam. With the foam, you can encase the pipe and fix it. This will remove the wobble.

Use a Smoke Detector

If you don’t have enough time or money, you may want to cover the ceiling hole with a smoke detector. You don’t need to patch the hole.

Cabinet doors

If your cabinet doors don’t stay shut, all you have to do is use a magnetic door catch. You can also go for a roller-style one.

Squeaky Floors

If you want to repair a squeaky floor, use a stud finder to find the floor joists. Next, you can drive in a screw via a pad, carpet and the subfloor to reach the floor joist. Just make sure that the upper part of the screw has no threads. Ideally, you may want to use trim screws since they have bigger heads. If this is the case, you may want to pull up the screw and then tighten it again.

Remove Water Stains

Before repainting the ceiling, you may want to try out this trick. You can use a mixture of water and bleach and then wait for a few days. If the stain is old, you can try a mold and mildew product. The stain will be gone within 24 hours. This trick may work both on textured and flat ceilings.

Wallpaper Seams

To fix a wallpaper seam, you can soak a rag in lukewarm water and then apply the paste around the seam. You may want to hold the rag for a couple of minutes and then open the seam a bit for more space for the seam sealer. Put the liquid into the gap and then push the paper against the wall using a roller. Then you can use a sponge to remove the sealer.

So, these are some quick and easy home improvement tips.

Better Sleep Means Knowing These Top 5 Things About Your Bed Sheets

Chances are we’ve all gone to bed, waking up either sweaty or miserable in the middle of the night. Most of us don’t realise that our bedding could be the culprit.

Reason why it is essential that you these 5 things in mind when purchasing your bed sheets to help you sleep better.

1. Natural, toxin-free materials:

Truth is your body breathes better with natural fibres. Be it organic cotton or hemp, there’s enough reason to buy a sheet set that does you good than any harm. Polyester and other materials not only make your body hot but are cloaked in a variety of chemicals that lead to acne, wheezing and a host of respiratory disorders including asthma among others. Volatile Organic Compounds found in petrochemical products have an adverse effect on your body.

To stay away from these, opt for GOTS certified organic cotton sheets which are well worth the small premium.

2. Colours:

If you get hot too much too often, chances are you’re sleeping on a multitude of dark colours. Opt for pastels or neutrals that leave your body calmer and your mind in peace before hitting the sack.

3. Weave:

Most people don’t understand that cotton itself is divided into a number of weaves. Weave refers to the way the threads are intertwined in crafting a sheet.

While Sateen has a luxurious feel and has a slight pearlescent sheen, percale is cool and crisp.

As a matter of fact sateen feels lovely in both warm and cold climates. However by culture, most in the western part of the world use Sateen more often than Percale while people in India by tradition use more percale.

4. Fiber properties and yarn

Did you know that sheets made of short, brittle fibers (read multi-ply sheets) feel coarse and brittle? The perfect analogy would be sandpaper. On the other hand, sheets with long-staple fibers in a single-ply yarn always, always feel heavenly because they’re smoother and longer. This also means that your sheets won’t pill unlike shorter fibres.

Do ask your retailer about whether your sheets are single-ply or multi-ply yarn.

5. Thread Count:

Don’t get fooled by this term for it most certainly means incorrect things to buyers. Thread Count is simply a measure of the number of threads weaved in a square inch and not the quality of the sheets. Most retailers inflate and put these out as 900 and 1200 TC which is nothing but a bluff.

A single-ply yarn sheet with 300 TC will feel much softer and lustrous than a fake 900 TC one.

Now that you have these handy questions to shoot to your salesperson, you’re bound to find the perfect bed.

4 Tips for Maintaining Vinyl Siding

We all know that vinyl siding is a great choice for one’s home due to its low maintenance and longevity. But that doesn’t mean that it is totally without basic maintenance needs or steps to be taken to see that it looks its best. Some of the common issues one might deal with are cracking, puncturing or perhaps pulling away from the house.

Thankfully, these proactive measures do not take a great deal of skill or a toolbox full of special tools.

Tips for Maintaining Vinyl Siding

1. Be sure to keep any shrubbery around the home trimmed back so that the branches cannot poke or scratch the siding. Failing to do this will result in the coating on the siding being scratched, nicked or punctured thus making the siding susceptible or mildew and mold.

2. No matter what type of siding you have on your home. It is important to take time to clean it, at least once a year. With vinyl, you can do this by using a soft scrub brush, soapy water, and a water hose for rinsing. Yes, you can use a power washer but be sure to keep it at the lowest setting and take care not to use excessive force.

3. In the event that you do discover dents, punctures or scratching, replace the piece as soon as possible. Be sure in doing this, that you use a siding removal tool so you can avoid damaging the surrounding pieces of siding.

4. Make time to clean your gutters- especially during the spring and fall or after a heavy storm as this will help keep the siding clean and prevent risk of damage to the siding.

It is also worth noting that while most people opt to have vinyl siding in a color they like, it you purchase a home with siding in a color you do not like, it can be painted. It will take two coats of 100% latex paint and the paint will need to be re-applied every two years in order to always look great.

Maintaining your vinyl siding is not a full-time job, but it does need the occasional repairs or cleaning. Don’t just assume that your home’s siding is a one and done aspect of ownership. Take time throughout the year to ensure that your siding will last as long (if not longer) than you were promised at installation. If you are new to vinyl, then be sure to talk to a local siding company and find out what they recommend for your particular type and style of home siding.

Qualities of Great and Professional General Contractors

If you want to become a great and a professional one General contractor at a managerial level, then you need to possess these qualities in you. To complete your project in a great way, to complete hundreds in some specific tasks in prescribed time, to possess leadership qualities in you, this is what great and professional Home contractors do! Here you will know that which are those main and crucial abilities if you want to count yourself as the best and great one contractor’s at the managerial scale:

Communicate clearly and in an effective manner

It is always seen that the best and reliable contractors, they pass clear communication messages to their team members. They effectively communicate with their teammates be it they work on small projects or big projects. If you know the importance of understanding effective communication and applying effective communication between your project, then you can become a great Builder at the managerial level. To execute and plan for your project and activities, it is this effective communication that matters. How can your teammates be able to perform on projects if you will not tell them precisely that what exactly you want! Your subordinate will fail to show their abilities if they do not get clear messages and instructions from their manager contractor. Most of the projects performances get completely and wholly derailed because of poor and worst communication skills from the sides of General Contractors. To become a great manager related to construction projects, you should know how to transcribe minor and intricate project details to your teammates.

Delegate the tasks

A professional and a senior Builder do not take the credit of the whole success of a project. He is the one who equally gives credit to his team members as well. A successful General Contractor delegate tasks and assignments to his skilled workers. He alternates their duties, assigns different tasks to them so that each of the workers gets equal chance to show the best part of their abilities.

They furnish references

All professional general contractors are registered. If you ask them for references, then they furnish it instantly. They always promise and assure a professional job. They do not feel hesitant to show a satisfied and happy list of their clientele to share with you. If that list shares their good and satisfying experiences with you, then that general contractor should be chosen by you.

They show certificates

Professional general contractors do not have to boast and brag about employing and hiring highly professional qualified technicians for your project. If he is a licensed contractor, then he will not hesitate to show his certificates to you. Reliable contractors are insured and also registered as well.

Problem-solving potential

A smart General contractor comes with problem skills as well. It is true that each and every construction project, they come with huge in some challenges and obstacles, hidden problems. He is the one who has this ability to identify each and every worst-case scenario and then makes his project to come out from that worst-case scenario as well. At times, construction projects do experience many of the additional problems like that of community backlash and political opinions, because of these issues the progress of any project gets also hinder and stops. A smart and sharp General contractor can easily handle these additional problems too.

Teamwork spirit

Anyone actually realizes the importance and significance of team work, then it is this smart and clever enough General contractor who understands! Any project cannot have success without the cooperation and coordination of rest of team workers. If any project gets accomplished and successful than a friendly General contractor does not forget to give credit and praise his teammates as well. He has this belief on phrase “let’s work together”! He develops and creates the environment of trust and also an appreciation for his workers. It is just a welcoming feedback which employees love a lot.

To call yourself as the smartest Contractors at the managerial level, you should not disregard these skills of communication and teamwork, problem-solving skills and delegating the tasks. To get this assurance that your project will get a success and too high return on investment, you need to possess these abilities in your personality then.

How to Make Your Home a Quieter Place

The houses today are constructed on the basis of modern, light-weighted and open-floor plans wherein it becomes difficult to find a little peace and quiet environment. In most of the houses, the walls are removed to increase the available space, kitchens are filled with larger appliances, and rooms are surrounded by home theaters making noise an essential part of our lives. We are the only creators of a noisy environment and we can only help ourselves in reducing it. This is not something that is created by nature it is simply a man-made product.

The evil effects of noise are that it can mess up your sleep, add to your stress, infringe on your privacy and in a nutshell it is hampering the quality of life we are living. Fortunately, we are lucky that there is a number of soundproofing or acoustic treatments that you can take help from to alleviate the problem. The acoustic barriers can efficiently help folks to get rid of this serious issue. Before, we proceed it is also important to know how sound actually works?

The clang of the bell and other physical things sends sound waves rippling through the ear. When these waves reach the ears, they vibrate a sensitive membrane i.e. the eardrum and we hear them as sounds. It is said to be the sound, not the noise. Noise is something that is unpleasing to the ears and is also termed as unwanted sounds.

Here are some helpful techniques for making your home a quieter place:

  • Cut down on noisemakers- Consider buying quiet appliances for your home including house fans, kitchen appliances etc. Buying quiet appliances is even more beneficial if they are to be kept nearby living or sleeping areas. Maintenance of existing appliances is also an important part of the equation. If you find something unusual, get it checked or repaired by the technician as soon as possible.
  • Use sound absorbing materials- The material that helps to reduce and absorbing the unwanted sound are something that every house owner would love to have. There are a lot of things that will work as a barrier that reflects and absorbs the noise entering your house. These acoustic barriers are quite helpful in minimizing the outdoor noises and absorbing the interior sounds. Ensure getting a spec sheet prepared by the tradesman so that you can check and approve it before its installation.
  • Install sound blocking doors- The largest opening in a house is its doorway. And a lot of sounds enters from this way. Thus, it is better to install weatherstrip or solid doors to effectively block the unwanted sound rays entering your house. The solid doors are quite expensive because of their thickness and are also available in a broader selection of elegant designs.
  • Weatherstrip interior doors- The actual sound doesn’t come through the door, it comes around the hollow spaces left between the doors. Thus, it is beneficial to install weatherstripping or door soundproofing to seal that space using adhesive-backed high-density foam tape. This will block the noise coming from outside.

 

Reasons Why Using Outdoor LED Signs Is a Good Idea

The use of LED signs outdoors is a great trend in today’s world. What you should know is that it has become a very important part of business today. The signs have actually been proven to increase awareness in the community as well as sales.

The outdoor LED signage can be applied for any kind of business, especially the medium and small sized kind of companies that don’t have a lot allotted to advertising. When a LED sign is in full color, then it promotes the business in a more effective manner regardless of the kind of business is in question. When electronic signs are compared to billboards, radio, newspapers and other traditional mediums, then they appear to be so much cheaper.

When you use the outdoor LED signs, you have in your hands a very powerful and very dynamic medium of advertising for the business. Your target audience and potential customers will definitely see it and take note.

Reasons why you should use the signs

Bright

Many people choose the signs because they are brighter than other kinds of signage. The bright signs attract attention and can be seen from a great distance, making them so attractive even in the sun.

Cost effectiveness

When purchasing the LED, it can be rather high priced. However, you will notice you save a lot in the long run. You will not spend anything when making changes to the display. The signage also consumes very little energy and you will need to do very little to maintain it.

Durable

Durability y is the other thing the outdoor LED signs are able to offer. The materials used to make them are not breakable and they do last a long time. You only need to do very few repairs as well as maintained. The LED modules come with a long lifespan.

Versatile

The LED signs are versatile. You can update them from your own computer just by a simple click. The changes can then appear immediately on the signage. You can also give scheduled messages.

Attractive

Use of visuals and graphics usually attract the attention of many and they are able to convert lots of information than would be the case if words alone were used. The aesthetic appeal of a place is also improved and this is why the signs are so widely used in airports, train stations and malls.

Less consumption of electricity

One of the main strengths of LED signage is the fact that power consumption is kept at a down low. LED sign boards consume less electricity than other signs that use incandescent bulbs and neon. It is therefore quite environmentally friendly as the carbon footprint is reduced.

Customized advertising

The use of LED signage helps one to keep pace with all the current situations like weather and so on. You can simply change the advertising message so as to customize it for the target audience. You can change the signs, text, messages and graphics at will so as to match the prevailing business goals.

How Do I Make My Asphalt Look Better?

Your asphalt pavement is important to you. It was a significant investment intended to increase property value, safety, and curb appeal. So it is no surprise that you are interested in learning ways to enhance the appearance so that it looks the way it did the day it was installed. Whether you have an asphalt drive way or parking lot, the options for making it look better remain fairly the same. Continue reading to learn how you can make your asphalt pavement look like new again.

Asphalt Overlays

If your paved surface is old and faded, an overlay is a great investment. As long as the existing pavement is in good structural condition, a new layer of asphalt can be poured directly over it, rendering a fresh, brand-new paved surface. Not only are overlays efficient and cost-effective, they are long-lasting. If your paved surface is not structurally sound, you can get the same results by removing the old pavement and repaving the entire surface with new asphalt. These two options are the most invasive and significant investments, but they are worth the overall value you receive long-term.

Do-It-Yourself Tips

If you are not interesting in a pavement renovation, you can still benefit by implementing some do-it-yourself strategies to keep your lot or drive looking great. First, routine debris removal is important. This involves picking up trash and litter on a daily basis. It also involves prompt leaf and snow removal every season. Not only does this prevent unsightly stains, corrosion, and hazards, it makes the lot look clean and fresh. If you have a large lot or complex, it is wise to invest in a street sweeping machine to make this chore more efficient.

Preventative Maintenance and Repairs

Whether you choose to overlay your existing pavement, remove and repave your asphalt, or implement DIY strategies, preventative maintenance and fixing minor damages is a must. Catching small problems early on can save you money and maintain strong pavement. This includes crack filling, pothole repair, line striping and painting, grade repairs, drainage adjustments, and more. You must always be maintaining your paved surfaces, regardless of condition or square footage.

Sealcoating

Every paved asphalt surface should have a protective coating. Asphalt needs to be seal coated every 3 to 5 years, especially in regions that are hot and dry most of the year. This thin, clear protective layer shields harmful sunrays, which prevents it from prematurely fading, cracking, and more. It also creates a waterproof barrier that prevents corrosion, crumbling, heaving, and more.

The Important Pros and Cons of Vinyl Siding

If you are on the market for new home siding, it is no surprise that you are considering vinyl. Vinyl plastic exterior has been a long-time favorite for both residential and commercial properties, and for many reasons. Although there are a few drawbacks you need to think about, this material is almost always a safe investment. Continue reading to review some of the common pros and cons of vinyl siding.

Pros

Vinyl siding is mostly admired for its extreme versatility. It comes in a wide range of colors, styles, textures, and more, which makes customizing the look of your home an easy task. Aside from versatility, vinyl is very low maintenance. Caring for it is simple, and there is very little you need to do to make it last a long time. Furthermore, installation is quick and easy, and the cost comparison to other options on the market is very low. It is one of the most affordable choices for residential siding you can buy.

  • Very durable;
  • Lasts between 30 and 40 years with good care;
  • Endless color options and schemes;
  • Very low maintenance;
  • Easy to clean and care for;
  • Insulated options increase energy efficiency;
  • Cheapest siding option on the market;

Cons

There are not many drawbacks to vinyl siding, however, there are a few attributes that are important for you to know in order to make an educated decision. For instance, it is not waterproof. Although it is water-resistant, poor installation can let water leak behind the panels and cause rot, mold, and mildew. Also, many homeowners have complained that the color option is too permanent with vinyl siding. Whatever color you choose, it will always be that color. That is because plastic exterior siding cannot be repainted like other siding materials.

Another common con to this material is the potential for the boards to warp, bend, or dent. This can happen from a string impact or extreme summer heat. Homeowners also complain that whole panels must be replaced because there is no patchwork in vinyl siding. Some additional common complaints about vinyl siding include:

  • 90% of homes have vinyl siding, so it’s not always the most unique;
  • Lawn mowers, weed trimmers, and even high winds can rip panels off;
  • Faulty installation can lead to water leaks, rot, mold, and decay;
  • It can crack in extreme cold weather, and warp in hot weather;

Mistakes In Choosing Posts For Letterboxes

Post mounted letterboxes are still popular these days since it is more visible than other types of mailboxes such as brick in, fence mounted as well as wall mounted ones. Not to mention, these boxes can easily improve the looks for your front yard. However, in order to obtain these features, you need to make sure that you partner this letterbox with the right post. Unfortunately, some homeowners neglect this, which can affect the safety and appeal of post mounted mailboxes. To help you, below are some of the most common mistakes in choosing posts for letterboxes.

Failing to consider mailbox designs

One of the main mistakes that homeowners make when buying mailbox posts is they fail to consider the design of their boxes. As mentioned above, there are numerous mailbox styles. But, there are also a wide selection of posts to choose from. Because of this, there are cases when individuals forget about their mailboxes when choosing a post. As a result, combinations can be odd. Or perhaps, mailboxes are too stylish than its posts making it unsightly.

Neglecting post composition

The next mistakes that individuals make when choosing posts for their mailboxes is they neglect post composition. Some individuals think that mailbox posts are all the same. However, there are numerous factors that differ posts from each other. For instance, when it comes to composition, individuals may find wood, steel and even composite posts. Each post provide certain features that can accommodate the need of homeowners. Sadly, this factor is neglected which can affect the looks and reliability of letterboxes. Not to mention, harsh weather conditions as well as vandalism can easily damage mailboxes due to inappropriate posts.

Not checking mounting options

Another mistake that homeowners make when choosing posts for their letterboxes is they do not check mounting options. As of now, homeowners can install mailboxes on posts in numerous ways. Sadly, when this factor is neglected, you are unable to install the mailbox properly. Not to mention, safety can also be compromised. So, it is best to ask letterbox providers if what posts are suitable for the box they purchased to make easier decisions.

Forgetting about installation processes

Finally, some homeowners also forget to ask about post installations. Just like mounting, there are different ways to install posts. Therefore, you need to check which process will meet your needs. Apart from that, you also need to make sure that you have the right tools when installing posts to ensure reliability.

These are only some of the mistakes that homeowners need to consider when searching for letterbox posts.

Attic Ventilation – Ensuring Enough Attic Air Circulation

Your home has a number of critical areas that need all the attention they could get. The attic for instance, plays an important role in ensuring that your roof lasts as intended. Proper air circulation of the attic is essential in keeping that the roof remains structurally sound over the years. You can determine whether there is adequate ventilation in the attic or if it is lacking. If you happen to notice some sort of musky smell in the attic, it is often not caused by the items being stored, but because of insufficient airflow. Fans are commonly used to resolve this problem. However, do roof ventilation fans work? Let’s find out.

How can I know that there’s enough air circulation in my attic?

Your attic, like most areas of your home, requires proper air circulation. There different ways on how to achieve enough airflow in this particular area. A homeowner can buy ventilation solutions in the market of apply different techniques to ensure there is sufficient air flowing through the attic.

What are my options?

Should you find signs of poor ventilation in your attic, you should consult professionals immediately. The sooner you find and fix the problem, the better it is for your home. There are a number of solutions available, but there is no single solution for everything. The homeowner or the professional paid to fix the problem must assess what type of solution would work best and for the long-term. Here’s a number of solutions for your home:

1. Ridge vent – this type of solution is, as its name suggests, a vent installed along the ridge line of your house. Before this type of vent is installed, roof decking is cut to allow air to flow through. It is highly essential that no other areas of the home block air from coming in or out.

2. Soffit vents – every roofing system needs to have air entry and exit points to keep it cool and dry. The soffit vents also work in conjunction with ridge vents and let air pass right through. However, in areas where the roofline meets the attic floor, insulation baffles must be put in place to prevent airflow from being restricted.

3. Attic fans – this solution is quite better as it does not rely on natural wind to ventilate the attic. Fans can be installed on the roofing system which sucks the air out when needed. Some newer models incorporate a thermostat which automatically turns on the fans to keep a stable temperature in the attic. Solar powered fans are also available, which would be beneficial since this would mean the fans can be self-sufficient. However, the costs associated with this solution raises a couple of questions. So, do attic ventilation fans work at all? The answer is yes.

As it is commonly known, fans dedicated to ventilate can easily introduce air or push air out of a home with ease. Unlike natural, free-flowing systems, these fans work at a much more efficient pace. There’s also the option for users to control the temperature within certain areas to prevent moisture buildup and other problems caused by stale air.